Room Layout
Click image to zoom in.
As you enter the Control Room use the wall switches to make sure the room lights are on. There are two operating rows of tables and one equipment rack.
Row 1 includes the Graphics Computers (Titles, Box-1, Box-3), the Prompter computer, the intercom base station, the TriCaster control panel, the TriCaster keyboard and mouse, and the live streaming check computer.
Row 2 includes the Audio Mixer and monitor.
The Equipment Rack includes the TriCaster computer. TV remotes are on the top.
Titles Computer
Watch the tutorial to learn how to create credits and lower-third titles, and send them to the TriCaster Use the power button on the back of the computer to turn it on. Enter graphics for the user name, and enter the password.
Prompter Computer
Watch the Prompter Tutorial Video for instructions to create today’s script and show it.
Turn on the computer and the monitor by pressing their power buttons.
After the computer boots up, click on Logan Live. Log in using the Logan Live password.
Audio Mixer
Watch the audio mixer introduction video. Turn on the monitor to the left of the audio mixer. (When the TriCaster is on this will show the Multiview display.)
Turn on the audio mixer using the button on the back. 
TriCaster Video Switcher
Watch the TriCaster tutorial videos for complete instructions.
| Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Logan Live Streaming |
Turn on the two TriCaster monitors next to the TriCaster Control Panel.
Get the Sharp TV Remote from the top of the Equipment Rack and use it to turn on the large wall-mounted TV monitor on the left. The large monitor on the left has to be turned on using the power button along its left-side. 
Get the Vizio TV Remote and turn on the small wall-mounted prompter monitor.
Near the bottom of the Equipment Rack, press the power button on the TriCaster computer to turn it on.
Once the TriCaster boots up, the control panel monitor on the right will show the log in screen with the user name TriCaster.
Use the keyboard to enter the password to log in.
Once the TriCaster has launched, click on the correct project folder.
Click on Start Live Production to load up the broadcast session.
After everything loads, the large wall-mounted screens will show the Multiview display on the left and the Program output on the right.
The TriCaster monitors will show the Multiview display on the left, and the Live Desktop display on the right.
Control Room Lights
Turn on the two task lights using the switches at the end of each row. Turn off the room lights using the wall switches near either one of the entry doors. Just before the live Logan Live broadcast, turn on the On-Air lights using the wall switch near the audio booth. When Logan Live is over, make sure to turn off the On-Air lights, turn-on the room lights, then turn off the task lights.